The Icon Bar: General: Missing CD Drive after Risc PC battery replacement
| |
Missing CD Drive after Risc PC battery replacement |
| |
ad (07:25 19/4/2023)
arawnsley (07:56 19/4/2023)
ad (10:28 19/4/2023)
CJE (11:27 20/4/2023)
ad (10:08 21/4/2023)
|
| |
|
Andrew Duffell |
Message #125423, posted by ad at 07:25, 19/4/2023 |
Posts: 3262
|
I replaced a leaky battery on a Kinetic Risc PC, but when booting it back up the CD drive no longer appears on the icon bar.
I'm assuming it was saved in the battery backed storage. Can anyone advise the process for adding it again please? (I think the machine is running RISC OS Select) |
| |
 [ Log in to reply ] |
| |
|
Andrew Rawnsley |
Message #125424, posted by arawnsley at 07:56, 19/4/2023, in reply to message #125423 |
R-Comp chap
Posts: 600
|
There's a chicken/egg problem (or at least was - Select might help). *configure CDROMdrives is what you want, but you can't issue it unless CDFS is available. But if no CD drives are configured, CDFS is disabled...
The solution is to set a bit in CMOS using a BASIC program or similar. Somewhere I have a "SetOneCD" program for this purpose. But I think it is on a floppy for RiscPC-fixing, and not here 
The "easy" solution is to configure it via !Boot/!Configure. If you set a CD via !Configure, (discs section) then the CMOS bit is set automatically.
You *might* be able to *rmreinit CDFS and then *configure cdromdrives maybe? Not tried. |
| |
[ Log in to reply ] |
| |
|
Andrew Duffell |
Message #125425, posted by ad at 10:28, 19/4/2023, in reply to message #125424 |
Posts: 3262
|
Thanks Andrew. I'll give that a go. |
| |
[ Log in to reply ] |
| |
|
Chris Evans |
Message #125427, posted by CJE at 11:27, 20/4/2023, in reply to message #125425 |
CJE Micros chap
Posts: 228
|
Google found:https://stardot.org.uk/forums/viewtopic.php?p=389417#p389417
*FX 162,138,1
Though I thought it was only needed on early versions of RISC OS 3.5 and/or 3.6. A Kinetic will be RISC OS 4.03 or later.
[Edited by CJE at 12:33, 20/4/2023] |
| |
[ Log in to reply ] |
| |
|
Andrew Duffell |
Message #125429, posted by ad at 10:08, 21/4/2023, in reply to message #125427 |
Posts: 3262
|
I did the rmreinit command, then looked in settings, and found a setting for CD drives. Clicked it up to "1" and the CD drive is there now. I rebooted, and the setting was retained.
Thanks for the help. |
| |
[ Log in to reply ] |
| |
|
The Icon Bar: General: Missing CD Drive after Risc PC battery replacement |
